Investigation of headed bar joints between precast concrete panels

The paper addresses the design and behaviour of narrow cast in - situ joints between precast concrete elements in which continuity of reinforcement is achieved through overlapping headed bars. Using headed bars minimises the lap length required with in the cast - in - situ joint region. Confining reinforcement in the form of transverse bars and vertical shear studs is also installed in the joint. Th e paper describes a series of tensile tests which were carried out to simulate the tensile zone of a joint loaded in pure flexure . The headed bars used in the tests were 25 mm in diameter with 70 mm square heads and yield strength of 5 30 MPa. The tests studied the influences of concrete strength, headed bar spacing, splice length, transverse reinforcement and conf ining shear studs on joint strength . A lap length of 100 mm in concrete with 28 MPa cylinder strength was found to be sufficient to develop the full strength of the headed bars . A strut - and - tie model (STM) is presented for determining joint strength. Analys is shows that the STM gives safe results even though it does not fully capture the observed joint behaviour. An upper bound plasticity model is found to give relatively good predictions of joint strength in most cases , although it also does not always capt ure the correct failure mechanism . The tests provide insights into joint behaviour which, in conjunction with numerical modelling, will facilitate the development of an improved design method. W idespread use of this system would lead to improvements in bui ldability, sustainability and health and safety in the construction of concrete structures

A Multinational Analysis of Mutations and Heterogeneity in PZase, RpsA, and PanD Associated with Pyrazinamide Resistance in M/XDR Mycobacterium tuberculosis.

Pyrazinamide (PZA) is an important first-line drug in all existing and new tuberculosis (TB) treatment regimens. PZA-resistance in M. tuberculosis is increasing, especially among M/XDR cases. Noted issues with PZA Drug Susceptibility Testing (DST) have driven the search for alternative tests. This study provides a comprehensive assessment of PZA molecular diagnostics in M/XDR TB cases. A set of 296, mostly XDR, clinical M. tuberculosis isolates from four countries were subjected to DST for eight drugs, confirmatory Wayne's assay, and whole-genome sequencing. Three genes implicated in PZA resistance, pncA, rpsA, and panD were investigated. Assuming all non-synonymous mutations cause resistance, we report 90% sensitivity and 65% specificity for a pncA-based molecular test. The addition of rpsA and panD potentially provides 2% increase in sensitivity. Molecular heterogeneity in pncA was associated with resistance and should be evaluated as a diagnostic tool. Mutations near the N-terminus and C-terminus of PZase were associated with East-Asian and Euro-American lineages, respectively. Finally, Euro-American isolates are most likely to have a wild-type PZase and escape molecular detection. Overall, the 8-10% resistance without markers may point to alternative mechanisms of resistance. Confirmatory mutagenesis may improve the disconcertingly low specificity but reduce sensitivity since not all mutations may cause resistance

Russell Ackoff

Russell Ackoff (usually known as ‘Russ’) was a pioneer of the application of systems approaches to management, both through theoretical developments and through a deep and practical engagement with many different organisations. He was a strong advocate of the need for systems approaches to take full account of the complexity of inter-related problems and not simply to present glib technical solutions

Collaboration and teamwork: immersion and presence in an online learning environment

In the world of OTIS, an online Internet School for occupational therapists, students from four European countries were encouraged to work collaboratively through problem-based learning by interacting with each other in a virtual semi-immersive environment. This paper describes, often in their own words, the experience of European occupational therapy students working together across national and cultural boundaries. Collaboration and teamwork were facilitated exclusively through an online environment, since the students never met each other physically during the OTIS pilot course. The aim of the paper is to explore the observations that here was little interaction between students from different tutorial groups and virtual teamwork developed in each of the cross-cultural tutorial groups. Synchronous data from the students was captured during tutorial sessions and peer-booked meetings and analysed using the qualitative constructs of ‘immersion’, ‘presence’ and ‘reflection in learning’. The findings indicate that ‘immersion’ was experienced only to a certain extent. However, both ‘presence’ and shared presence were found by the students, within their tutorial groups, to help collaboration and teamwork. Other evidence suggests that communities of interest were established. Further study is proposed to support group work in an online learning environment. It is possible to conclude that collaborative systems can be designed, which encourage students to build trust and teamwork in a cross cultural online learning environment.</p

Frame dragging with optical vortices

General Relativistic calculations in the linear regime have been made for electromagnetic beams of radiation known as optical vortices. These exotic beams of light carry a physical quantity known as optical orbital angular momentum (OAM). It is found that when a massive spinning neutral particle is placed along the optical axis, a phenomenon known as inertial frame dragging occurs. Our results are compared with those found previously for a ring laser and an order of magnitude estimate of the laser intensity needed for a precession frequency of 1 Hz is given for these "steady" beams of light.Comment: 13 pages, 2 figure

Surface electrons at plasma walls

In this chapter we introduce a microscopic modelling of the surplus electrons on the plasma wall which complements the classical description of the plasma sheath. First we introduce a model for the electron surface layer to study the quasistationary electron distribution and the potential at an unbiased plasma wall. Then we calculate sticking coefficients and desorption times for electron trapping in the image states. Finally we study how surplus electrons affect light scattering and how charge signatures offer the possibility of a novel charge measurement for dust grains.Comment: To appear in Complex Plasmas: Scientific Challenges and Technological Opportunities, Editors: M. Bonitz, K. Becker, J. Lopez and H. Thomse

Modelling size-fractionated primary production in the Atlantic Ocean from remote sensing

This is the author accepted manuscript. The final version is available from Elsevier via the DOI in this recordMarine primary production influences the transfer of carbon dioxide between the ocean and atmosphere, and the availability of energy for the pelagic food web. Both the rate and the fate of organic carbon from primary production are dependent on phytoplankton size. A key aim of the Atlantic Meridional Transect (AMT) programme has been to quantify biological carbon cycling in the Atlantic Ocean and measurements of total primary production have been routinely made on AMT cruises, as well as additional measurements of size-fractionated primary production on some cruises. Measurements of total primary production collected on the AMT have been used to evaluate remote-sensing techniques capable of producing basin-scale estimates of primary production. Though models exist to estimate size-fractionated primary production from satellite data, these have not been well validated in the Atlantic Ocean, and have been parameterised using measurements of phytoplankton pigments rather than direct measurements of phytoplankton size structure. Here, we re-tune a remote-sensing primary production model to estimate production in three size fractions of phytoplankton (10 μm) in the Atlantic Ocean, using measurements of size-fractionated chlorophyll and size-fractionated photosynthesis-irradiance experiments conducted on AMT 22 and 23 using sequential filtration-based methods. The performance of the remote-sensing technique was evaluated using: (i) independent estimates of size-fractionated primary production collected on a number of AMT cruises using 14C on-deck incubation experiments and (ii) Monte Carlo simulations. Considering uncertainty in the satellite inputs and model parameters, we estimate an average model error of between 0.27 and 0.63 for log10-transformed size-fractionated production, with lower errors for the small size class (10 μm), and errors generally higher in oligotrophic waters. Application to satellite data in 2007 suggests the contribution of cells 2 μm to total primary production is approximately equal in the Atlantic Ocean.UK National Centre for Earth ObservationNatural Environment Research Council (NERC)Plymouth Marine Laborator

A tri-dimensional approach for auditing brand loyalty

Over the past twenty years brand loyalty has been an important topic for both marketing practitioners and academics. While practitioners have produced proprietary brand loyalty audit models, there has been little academic research to make transparent the methodology that underpins these audits and to enable practitioners to understand, develop and conduct their own audits. In this paper, we propose a framework for a brand loyalty audit that uses a tri-dimensional approach to brand loyalty, which includes behavioural loyalty and the two components of attitudinal loyalty: emotional and cognitive loyalty. In allowing for different levels and intensity of brand loyalty, this tri-dimensional approach is important from a managerial perspective. It means that loyalty strategies that arise from a brand audit can be made more effective by targeting the market segments that demonstrate the most appropriate combination of brand loyalty components. We propose a matrix with three dimensions (emotional, cognitive and behavioural loyalty) and two levels (high and low loyalty) to facilitate a brand loyalty audit. To demonstrate this matrix, we use the example of financial services, in particular a rewards-based credit card